Whiteline Whiteline Front Upper Control Arm - Fixed Offset - Nissan Frontier 2005-2021 KTA301

Front Upper Control Arm - Fixed Offset - Nissan Frontier 2005-2021

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology. Engineered for optimal suspension geometry and improved handling response. Provides precise wheel location and consistent alignment. Kit includes: 2 Arms

Applicable to: - NISSAN NAVARA 2005-2015 D40 2WD
- NISSAN NAVARA 2005-2015 D40 4WD
- NISSAN NAVARA 2015-ON D23, NP300 2WD DUAL CAB (COIL SPRING REAR)
- NISSAN NAVARA 2015-ON D23, NP300 2WD SINGLE & KING CAB (LEAF SPRING REAR)
- NISSAN NAVARA 2015-ON D23, NP300 4WD DUAL CAB (COIL SPRING REAR)
- NISSAN NAVARA 2015-ON D23, NP300 4WD SINGLE & KING CAB (LEAF SPRING REAR)